Fiberglass tissue also called fiberglass veil, mat is made similar as papermaking technology, chopped the continuous glass roving into 6-24mm, mixing and dispersing with water through blender, producing a uniform dense slurry. Then the slurry material is uniform dispersed to a mesh formed fiberglass tiuuse. After dehydration, the fiberglass tissue is going to be treated with binderand sizing agent which imparts the tissue compatible with various media. Finally, the wet binder and sizng agent tissue drought and rolled. The fiberglass tissue is usually produced 30-300g/m2, available width 50mm-2000mm.
Application:
Support for SBS,APP asphalt felt
Fiberglass non-woven roofing tissue is made mineral fiber with excellent anti-corrosion, fire resistance, chemical resistance, great dimension stability, high strength, easy-wet, good compatibility with bitumen. EAS offer RM roofing tissue with reinforced yarn which will greatly improve the tensile and tear strength.
Item | Area weight, g/m2 | Binder content, % | Yarn space | Longitudinal tensile Strength N/50mm | Transverse tensile strength N/50mm |
RM-50 | 50 | 18 | / | ≥170 | ≥100 |
RM-60 | 60 | 18 | / | ≥180 | ≥120 |
RM-90 | 90 | 20 | / | ≥350 | ≥220 |
RM-100 | 100 | 20 | / | ≥380 | ≥240 |
RM-120 | 120 | 18 | / | ≥450 | ≥300 |
RM-45R | 45 | 18 | 15,30 | ≥200 | ≥60 |
RM-50R | 50 | 20 | 15,30 | ≥220 | ≥80 |
RM-60R | 60 | 20 | 15,30 | ≥240 | ≥100 |
RM-90R | 90 | 20 | 15,30 | ≥400 | ≥20 |
Mineral wool acoustic facing or lamination
Fiberglass non woven veil for facing is excellent surface smooth, low fuzz and compatible with various coating. EAS offer high quality and economic facing tissue for mineral wool, rockwool lamination and decoration.
Item | Area weight, g/m2 | Binder content, % | Longitudinal Tensile Strength N/50mm | Transverse tensile strength N/50mm |
TM-40 | 40 | ≤25 | ≥120 | ≥60 |
TM-50 | 50 | ≤25 | ≥150 | ≥75 |
TM-100 | 100 | ≤25 | ≥250 | ≥150 |
PCB,CEM-3 renforcement
E glass non woven tissue is excellent electric insulation and heat resistance. EAS’s PCM tissue for CEM-3 can meet IPC-4130. It is well compatible with epoxy resin system.
Item | Area weight, g/m2 | Binder content, % | Longitudinal tensile Strength N/50mm | Transverse tensile strength N/50mm |
PCM-75 | 75 | 11 | ≥225 | ≥150 |
PCM-60 | 105 | 11 | ≥240 | ≥160 |